Dotworkz D3-TR-MVP Installationsanleitung PDF herunterladen (Seite 5)

PRODUCT INSTALLATION

PRECAUTIONS – WARNINGS – ADDITIONAL INFORMATION

(RETAIN THIS DOCUMENT)

IMPORTANT SAFEGUARDS

1 Read Instructions - All the safety and operating instructions should be read

before the unit is operated.

2 Retain Instructions -The safety and operating instructions should be retained for

future reference.

3. Heed Warnings - All warnings on the unit and in the operating instructions

should be adhered to.

4. Follow Instructions -All operating & user instructions should be followed.

5. Electrical Connections - Only a qualified electrician should make electrical

connections.

6. Attachments - Do not use attachments not recommended by the product

manufacturer as they may cause hazards

7. Cable Runs - All cable runs must be within permissible distance

8. Mounting -This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit. Accordingly:

a. Installation should be made by a qualified installer.

b. Installation should be in compliance with local codes

c. Care should be exercised to select suitable hardware to install the unit,

taking into account both the composition of the mounting surface and

the weight of the unit. Be sure to periodically examine the unit and the

supporting structure to make sure that the integrity of the

installation

is intact. Failure to comply with the foregoing could result in the unit

separating from the support structure and falling, with resultant damages

or injury to anyone or anything struck by the failing unit,

SERVICE

If the unit ever needs repair service, customer should contact Dotworkz Systems +1

(619) 224-LIVE (5483) for return authorization & shipping instructions

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE

COMPONENTS TO WATER OR MOISTURE

The lightning flash with an arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of non-insulated "dangerous

voltage" within the product's enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance

UNPACKING

Unpack carefully. Electronic components can be damaged if improperly handled

or dropped. If an item appears to have been damaged in shipment, replace it

properly in its carton and notify the shipper. Be sure to save

1.The shipping carton and packaging material. They are the safest material in

which to make future shipments of the equipment.

2. These Installation and Operating Instructions.

 For technical questions or product returns – call Dotworkz Customer Service (866-575-4689) 7:30 AM to 4:30 PM (PST). The proper

technician will contact you as soon as possible.

 The External Nut on All electrical wire feed Glands must be tightened to create a weather tight seal prior to putting D2 in service. Failure

to create this seal may result in water incursion into enclosure. This may lead to electrical shock, product failure and damage to electrical

systems installed within enclosure, including but not limited to damage to camera, heater and blower circuitry, cooling circuitry and other

systems installed in unit.

 All screws on hinged lower must be tightened to create seal on enclosure. Failure to create this seal may result in water incursion into

enclosure. This may lead to electrical shock, failure and damage to electrical systems installed within enclosure, including but not limited

to damage to camera, heater and blower circuitry, cooling circuitry and other systems installed in unit.

 Do not over tighten any Screws, Stand Offs, or other fasteners on this unit. Failure to heed this warning will cause damage or failure of

the D2 enclosure.

 Be sure to take extra care to Protect Lens of unit prior to and during installation, and during service. Suspension packaging box is a handy

platform to protect lens and enclosure, while installing camera and accessory electronics before installation. Failure to protect lens will

adversely affect product perform

1 2 3 4 5 6 7 8 9 10 ... 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Dotworkz D3-TR-MVP Installationsanleitung Seite 5

Kommentare zu diesen Handbüchern